一、概述Outline

QJ（D/S）R型精小型氣動O型切斷球閥一種轉角為90°的旋轉類控制閥。它由氣動活塞式執行機構和O型球閥組成，閥芯采用圓柱形通孔球體。QJ（D/S）R型為軟密封球閥、QJ（D/S）RY型為硬密封球閥。
該產品以壓縮空氣為動力源，接受集散控制系統（DCS），可編程控制器（PLC）等開關信號，通過電磁閥可實現對閥門快速位式控制。
該產品采用直通型鑄造閥體，球面經特殊工藝加工和硬化處理，使其表面光滑耐磨，具有壽命長、結構緊湊、動作可靠、流通能力大、流阻系數小、安裝方便及良好的切斷性能等特點。產品廣泛應用于造紙、石化、冶金、航天、食品、醫藥、水處理等行業，特別適用于高黏度和含有纖維介質的工藝控制。
氣動活塞式執行機構可分為單作用和雙作用兩種。雙作用使用在失電或失氣時，閥門處于失電或失氣時的位置，以確保繼續生產。單作用在失電或失氣時，閥門處于原始極限位置（全開或全閉），以確保生產過程處于安全位置。

QJ （D / S） R-type O-intensive small pneumatic valve one kind of cut off the corner of 90 ° rotation of the controlled valve. It consists of pneumatic piston actuator and the composition of O-type ball valve, valve core sphere using cylindrical hole. QJ （D / S） R-type for soft seated ball valve, QJ （D / S） RY-type of seal valve.
The product is compressed air as power source, accept the distributed control system （DCS）, programmable logic controller （PLC） such as switching signals, can be realized through the solenoid valve control valve fast bits.
The product is through casting body, spherical processed by special technology and hardened, making it a smooth surface wear, with a long life, compact structure, reliability, flow capacity, flow resistance coefficient is small, easy to install and good cut-off performance characteristics. Products are widely used in papermaking, petrochemical, metallurgy, aerospace, food, medicine, water treatment and other industries, particularly for high viscosity and contain fiber media process control.
Pneumatic piston actuators can be divided into single and double acting two. Dual role in the loss of power or loss of use of gas when the valve is out of power or loss of gas when the position to ensure continued production. Single in the loss of power or loss of gas when the valve is in the original extreme position （open or closed） to ensure that the production process in a secure location

2、執行機構扭轉及動作時間Action to reverse the actuator and the time

注：1、雙作用執行機構在75%負載情況下的動作時間   2、縮短動作時間可允許非標配置

Note: 1, double-acting actuators at 75% load case, the action time of 2 to shorten the operating time to allow non-standard configuration

三、允許壓差Permissible differential pressure
1、雙作用執行機構  PN1.6閥體 Double-acting valve actuator PN1.6

 單位：MPa

2、單作用執行機構   PN1.6閥體Single-acting valve actuator PN1.6

四、可配附件Available Accessories
電磁閥、手輪機構、閥位開關、空氣過濾減壓器等。

Solenoid valve, hand wheel, valve position switch, air filter regulator and so on

五、外形尺寸和重量Dimensions and weight

1、法蘭式氣動O型固定球閥O-fixed flange ball valve pneumatic

  單位：mm

2、法蘭式O型浮動球閥Flange O-floating ball valve

 單位：mm

3、意大利式氣動O型對夾球閥Italy pneumatic wafer ball valve

六、訂貨須知Ordering Information

1、產品型號 2、公稱通徑 3、公稱壓力 4、閥體和閥內組件材料（介質性能）
5、介質溫度 6、雙作用或單作用（單作用請注明氣開式或氣關式）

1, Model 2, DN 3, PN 4, the valve body and internal components of materials （dielectric properties）
5, 6 medium temperature, double or single acting （one role please specify air or gas shut-open type）